Every reading.
One clear picture.
Connect your ESP32, follow the flow, and keep a lasting record of your pipeline.
PIPELINE MONITORING
System overview
A clearer view of your water, from inlet to outlet.
Flow comparison
Inlet and outlet readings over time
Readings will appear when your ESP32 sends data.
Pipeline condition
Latest device assessment
Awaiting readings
Connect your device to begin monitoring the pipeline.
- Leak severity
- —
- Calibration
- Not reported
- Sensors active
- — / 2
- Device connection
- No data received
Your pipeline at a glance
Two sensors. One monitored section.
Recent readings 0
Stored in your Cloudflare database
| Received at | Inlet L/min | Outlet L/min | Loss L/min | Condition | Severity |
|---|
Your measurements will be securely saved here as they arrive.
YOUR DATA, RETAINED
Reading history
Review and export your measurements. CSV exports include up to 50,000 matching readings.
| Received at (UTC+4) | Device | Inlet L/min | Outlet L/min | Loss L/min | Lost % | Condition | Severity |
|---|
New readings appear automatically. Try another date or condition.
FROM DEVICE TO DASHBOARD
Connect your ESP32
Send measurements directly over Wi-Fi or through the USB bridge.
A home for every reading
The device or USB bridge sends a JSON reading to this HTTPS address. Each accepted reading is saved in Cloudflare D1.
Uploads require your device token in the Authorization header. Keep it in your device configuration or bridge environment.
Choose your data path
Direct Wi-Fi
Upload the supplied Cloudflare-enabled firmware. Set your Wi-Fi details, endpoint, device token, and TLS configuration. The board uploads every 20 seconds.
Laptop can be disconnectedUSB serial bridge
Keep the ESP32 plugged in and run the supplied bridge on this laptop. It forwards the existing serial readings to the same cloud endpoint.
Bridge must stay runningStart with the leak valve closed. Let the pipe fill and allow the device to finish its zeroing cycle before testing a leak.
Measured flow, clearly represented
This dashboard displays the two flow sensors in your supplied code. It records the device’s flow balance assessment and does not claim an acoustic measurement or an exact leak position. Acoustic profiling can be added when that hardware and data are available.